Service Hotline
0411-87307760
Technical Sales Hotline60-TE / 60-WTH
Thermocouple assemblies and resistance thermometers with bayonet nut connector
Sensors with bayonet nut connectors are recommended for mea- suring temperatures inside the blocks of machines, mechanisms and die cast forms, primarily in the plastic industry, at temperatures up to 400°C.
Advantages of sensors with bayonet nut connectors
• Reliable construction
• Bending resistant cabling
• Class 1 for type J and type K
(High measuring precision)
The form of the measuring tip is mostly half-round, planar or with a point angle of 118°. The latter aligns itself very well into a standard bore hole.
The sensors are fitted with a pressure spring that, in combination with the correct installation length, respectively contact pressure at the installation point, protects the cable from deflexion. The instal- lation length is variable, limited by the length of the pressure spring.
The standard inner diameter of the bayonet nut is 12.2 and 15.2 mm. Please note, that we do offer customised versions.
The standard mounted measuring elements are Pt 100:
2-, 3- or 4-wire, accuracy class N according to EN 60751 or ther- mocouple types J and K in class 1. Double versions or the applica- tion of special sensors are also possible.
Application examples for thermocouple assemblies and resistance thermometers with bayonet nut connector:
Plant and machine construction
Heat treatment
Plastic industry
